Fire Suppression System Design and Consulting

July 15, 2022 12:00 am Published by Leave your thoughts

A lot goes into planning a successful business. Fire safety is one detail that simply cannot be overlooked at your business location. Your fire safety system will greatly impact the overall safety of your building and the long-term success of your company. Let’s look at five important steps to planning your fire protection system.

First Things First

When you start designing your system, you need to remember your primary goal: protecting the people who enter your building. Every decision when planning your fire protection system should center around this main goal. This is never the place to cut corners to speed up the process or save a few dollars.

Nail Down Compliancy Codes

You need to educate yourself on what compliance codes you will be obligated to fulfill. If you do not fulfill compliance codes, you will be fined. In addition to this, and much more importantly, you will put at risk the lives of the people who enter your business.

You should keep in mind, though, that most codes are just the bare minimum. If you want your building to be as safe as possible, it is often necessary to go beyond simple compliance codes. Fire protection consultants will be able to advise you on other steps you can take to make your location safe.

Detection Solutions

The first line of defense in fire protection is detection. Your fire protection system should come equipped with modern detection devices. You will want the most up-to-date technology available to increase evacuation time and decrease damage to your building in the event of a fire.

Some detection devices sense when temps are rising too quickly. This is even more effective than smoke detectors which only alert occupants once the smoke has begun collecting from a fire.

Alerts and Alarms

The next most important step is the alerts and alarms that will be used to alert occupants. This is one of the most crucial parts of your system as this is the factor that will kick-start an evacuation. The more effective this part of your system operates, the more quickly occupants will be able to start and complete an evacuation. This is truly the foundation of saving lives.

An advanced alert system will also provide information to responders as well. This information can help to save time when responders arrive on the scene. They will be notified where they are needed most and how to enter the building most effectively.

This can protect the lives of occupants and the responders who assist in the event of a fire.

Fire Suppression

Fire suppression is usually the first part of a fire system that people think of, but it comes into play after detection and notification. Fire suppression systems are the part of your system that will actively attempt to extinguish the fire.

Fire suppression systems consist of sprinklers and fire extinguishers. It is vital that these systems are always in perfect working order.

Maintenance

A fire protection system is only as good as its maintenance. If these systems are not properly maintained and updated, they cannot perform their intended job. This can put occupants at risk.

Categorised in:

This post was written by admin

Leave a Reply

Your email address will not be published. Required fields are marked *